Active Boot Disk Suite 9 0 0 Full Serial 23 !NEW!

Active Boot Disk Suite 9 0 0 Full Serial 23 !NEW!

Download === https://bltlly.com/2t7Fr6

To continue the train of reviews on software developed by LSoft Technologies Inc., I'll be reviewing one of their core products: Active@ Boot Disk. What this software proves itself to be is a powerful disk utility tool that allows the user to create a portable, working bootable disk that...

FortiWeb appliances usually have multiple disks. FortiWeb stores its firmware (operating system) and configuration files in a flash disk, but most models of FortiWeb also have an internal hard disk or RAID that is used to store non-configuration/firmware data such as logs, reports, auto-learning data, and web site backups for anti-defacement. During startup, after FortiWeb loads its boot loader, FortiWeb will attempt to mount its data disk. If this fails due to errors, you will have the opportunity to attempt to recover the disk.

Reset NVMe controller (soft reset of the device, a hard reset requires a full power cycle, hot plug, or system reboot). We saw the case of the firmware update where this command came in handy, but this can also be used.

This way, the guest would first attempt to boot from the disk scsi0, if thatfails, it would go on to attempt network boot from net0, and in case thatfails too, finally attempt to boot from a passed through PCIe device (seen asdisk in case of NVMe, otherwise tries to launch into an option ROM).

Besides the problem of format, importing disk images from other hypervisorsmay fail if the emulated hardware changes too much from one hypervisor toanother. Windows VMs are particularly concerned by this, as the OS is verypicky about any changes of hardware. This problem may be solved byinstalling the MergeIDE.zip utility available from the Internet before exportingand choosing a hard disk type of IDE before booting the imported Windows VM.

To be able to boot directly from the Cloud-Init image, set the boot parameterto order=scsi0 to restrict BIOS to boot from this disk only. This will speedup booting, because VM BIOS skips the testing for a bootable CD-ROM.

Disks, optical drives and passed-through storage USB devices will be directlybooted from, NICs will load PXE, and PCIe devices will either behave like disks(e.g. NVMe) or load an option ROM (e.g. RAID controller, hardware NIC).

Note that only devices in this list will be marked as bootable and thus loadedby the guest firmware (BIOS/UEFI). If you require multiple disks for booting(e.g. software-raid), you need to specify all of them here.

rommon 2 > devDevices in device table: id name bootdisk: Internal flash drive disk0: External USB drive 0rommon 3 > dir bootdisk:Please reset before continuing

Now the switches boot up ok. I've set up a few 6880s before with no issue. I'm assuming this was user error on my part. Can anyone tell me why the switches booted they way they did and why ROMMON wouldn't let me view bootdisk:?

Router# sh run | include bootboot-start-markerboot-end-markerRouter#sh bootvarBOOT variable = bootdisk:c6880x-ipservicesk9-mz.SPA.152-1.SY6.binCONFIG_FILE variable does not existBOOTLDR variable does not existConfiguration register is 0x2102

ROM: System Bootstrap, Version 15.1(02)SY01 [ Rel 1.1], RELEASE SOFTWAREBOOTLDR:Router uptime is 32 minutesUptime for this control processor is 33 minutesSystem returned to ROM by power-onSystem image file is "bootdisk:c6880x-ipservicesk9-mz.SPA.152-1.SY6.bin"Last reload reason: power-on

Cisco C6880-X-LE ( Intel(R) Core(TM) i3- CPU @ 2.00GHz ) processor (revision ) with 2997247K/409600K bytes of memory.Processor board ID SAL2030018FProcessor signature 0xA7060200Last reset from power-on1 Virtual Ethernet interface1 Gigabit Ethernet interface32 Ten Gigabit Ethernet interfaces1955824K bytes of USB Flash bootdisk (Read/Write)

upgrade rom-monitor slot 5 file t _rm.bin.SPA.15$-monitor slot 5 file t _rm.bin.SPA.151 -02r.SYS4Copying t _rm.bin.SPA.151-02r.SYS4 onto SP's bootdisk bootdisk:rommon_gvrn.bin...Loading c6880x_rm.bin.SPA.151-02r.SYS4 from 10.10.10.1 (via Vlan1): !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!![OK - 8388608 bytes]

ROM: System Bootstrap, Version 15.1(02r)SYS4, RELEASE SOFTWAREBOOTLDR: Router uptime is 0 minutesUptime for this control processor is 1 minuteSystem returned to ROM by power-onSystem image file is "bootdisk:c6880x-ipservicesk9-mz.SPA.152-1.SY6.bin"Last reload reason: Reload Command

Cisco C6880-X-LE ( Intel(R) Core(TM) i3- CPU @ 2.00GHz ) processor (revision ) with 2997247K/409600K bytes of memory.Processor board ID SAL2030018FProcessor signature 0xA7060200Last reset from s/w reset1 Virtual Ethernet interface1 Gigabit Ethernet interface32 Ten Gigabit Ethernet interfaces1955824K bytes of USB Flash bootdisk (Read/Write)

Yes, switch successfully boots ios on reload. I don't have any boot statements in the config as yet (I'll add one just now), The ROMMON upgrade attempt seemed to clear the BOOT variable so I had to redo it. See below for output.

ROM: System Bootstrap, Version 15.1(02r)SYS4, RELEASE SOFTWAREBOOTLDR:Router uptime is 2 minutesUptime for this control processor is 2 minutesSystem returned to ROM by reload at 11:31:58 UTC Wed Apr 18 2018System image file is "bootdisk:c6880x-ipservicesk9-mz.SPA.152-1.SY6.bin"Last reload reason: Reload Command

Cisco C6880-X-LE ( Intel(R) Core(TM) i3- CPU @ 2.00GHz ) processor (revision ) with 2997247K/409600K bytes of memory.Processor board ID SAL2030018FProcessor signature 0xA7060200Last reset from s/w reset1 Virtual Ethernet interface1 Gigabit Ethernet interface32 Ten Gigabit Ethernet interfaces1955824K bytes of USB Flash bootdisk (Read/Write)

When I break into rommon I can't view the contents of bootdisk or issue boot commands (even after the rommon upgrade). The bug CSCtq26164 (for asr1ks) is the problem I'm having in rommon and the given workaround works for me (although I have to do this every time I break into rommon).

+----------------------+| OFD Linux Loading... |+----------------------+Sanity Check [PASS]Setup 15360 bytesSystem 16075 kBLinux version 3.2.16 (fengbwu@sha-isbu-edit15) (gcc version 4.6.3 (crosstool-NG 1.15.3) ) #508 SMP Tue May 19 21:40:23 CST 2015Command line: earlyprintk=serialKERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMDBIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 0000000000400000 (reserved) BIOS-e820: 0000000000400000 - 0000000040000000 (usable) BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)bootconsole [earlyser0] enabledNX (Execute Disable) protection: activeDMI not present or invalid.No AGP bridge foundlast_pfn = 0x40000 max_arch_pfn = 0x400000000x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106init_memory_mapping: 0000000000000000-0000000040000000No NUMA configuration foundFaking a node at 0000000000000000-0000000040000000Initmem setup node 0 0000000000000000-0000000040000000 NODE_DATA [000000003fffb000 - 000000003fffffff]Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal emptyMovable zone start PFN for each nodeearly_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000400 -> 0x00040000SMP: Allowing 1 CPUs, 0 hotplug CPUsAllocating PCI resources starting at 40000000 (gap: 40000000:be000000)setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1PERCPU: Embedded 24 pages/cpu @ffff88003fc00000 s69056 r8192 d21056 u2097152Built 1 zonelists in Node order, mobility grouping on. Total pages: 257159Policy zone: DMA32Kernel command line: console=ttyS0,9600 noefi acpi=off earlyprintk=serialPID hash table entries: 4096 (order: 3, 32768 bytes)xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340Checking aperture...No AGP bridge foundMemory: 960324k/1048576k available (2616k kernel code, 3524k absent, 84728k reserved, 3820k data, 61244k init)SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1Hierarchical RCU implementation.NR_IRQS:4352 nr_irqs:256 16Console: colour dummy device 80x25console [ttyS0] enabled, bootconsole disabledconsole [ttyS0] enabled, bootconsole disabledFast TSC calibration using PITDetected 1999.953 MHz processor.Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.90 BogoMIPS (lpj=1999953)pid_max: default: 32768 minimum: 301Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)Mount-cache hash table entries: 256CPU: Physical Processor ID: 0CPU: Processor Core ID: 0ENERGY_PERF_BIAS: Set to 'normal', was 'performance'ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)using mwait in idle threads.SMP alternatives: switching to UP codeFreeing SMP alternatives: 12k freedweird, boot CPU (#0) not listed by the BIOS.SMP motherboard not detected.SMP disabledPerformance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.PEBS disabled due to CPU errata.... version: 3... bit width: 48... generic registers: 8... value mask: 0000ffffffffffff... max period: 000000007fffffff... fixed-purpose events: 3... event mask: 00000007000000ffBrought up 1 CPUsTotal of 1 processors activated (3999.90 BogoMIPS).devtmpfs: initializedNET: Registered protocol family 16PCI: Using configuration type 1 for base accessbio: create slab at 0ACPI: Interpreter disabled.vgaarb: loadedPCI: Probing PCI hardwarepci 0000:00:01.0: PCI bridge to [bus 01-01]pci 0000:00:01.1: PCI bridge to [bus 02-02]pci 0000:00:01.2: PCI bridge to [bus 03-03]pci 0000:00:1c.0: PCI bridge to [bus 04-04]pci 0000:00:1c.1: PCI bridge to [bus 05-05]pci 0000:00:1c.2: PCI bridge to [bus 06-06]pci 0000:00:1c.3: PCI bridge to [bus 07-07]pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:2310]pnp: PnP ACPI: disabledpci 0000:00:1c.3: BAR 9: assigned [mem 0x40000000-0x401fffff 64bit pref]pci 0000:00:1c.3: BAR 7: assigned [io 0x1000-0x1fff]pci 0000:00:1c.2: BAR 9: assigned [mem 0x40200000-0x403fffff 64bit pref]pci 0000:00:1c.2: BAR 7: assigned [io 0x4000-0x4fff]pci 0000:00:1c.1: BAR 9: assigned [mem 0x40400000-0x405fffff 64bit pref]pci 0000:00:1c.1: BAR 7: assigned [io 0x5000-0x5fff]pci 0000:00:1c.0: BAR 9: assigned [mem 0x40600000-0x407fffff 64bit pref]pci 0000:00:1c.0: BAR 7: assigned [io 0x6000-0x6fff]pci 0000:00:01.0: PCI bridge to [bus 01-01]pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]pci 0000:00:01.0: bridge window [mem 0xd5500000-0xd55fffff]pci 0000:00:01.0: bridge window [mem 0xd5000000-0xd50fffff 64bit pref]pci 0000:00:01.1: PCI bridge to [bus 02-02]pci 0000:00:01.1: bridge window [mem 0xd0000000-0xd20fffff]pci 0000:00:01.2: PCI bridge to [bus 03-03]pci 0000:00:01.2: bridge window [mem 0xd4000000-0xd4ffffff]pci 0000:00:01.2: bridge window [mem 0xd3000000-0xd3ffffff 64bit pref]pci 0000:00:1c.0: PCI bridge to [bus 04-04]pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]pci 0000:00:1c.0: bridge window [mem 0xd5400000-0xd54fffff]pci 0000:00:1c.0: bridge window [mem 0x40600000-0x407fffff 64bit pref]pci 0000:00:1c.1: PCI bridge to [bus 05-05]pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]pci 0000:00:1c.1: bridge window [mem 0xd5300000-0xd53fffff]pci 0000:00:1c.1: bridge window [mem 0x40400000-0x405fffff 64bit pref]pci 0000:00:1c.2: PCI bridge to [bus 06-06]pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]pci 0000:00:1c.2: bridge window [mem 0xd5200000-0xd52fffff]pci 0000:00:1c.2: bridge window [mem 0x40200000-0x403fffff 64bit pref]pci 0000:00:1c.3: PCI bridge to [bus 07-07]pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]pci 0000:00:1c.3: bridge window [mem 0xd5100000-0xd51fffff]pci 0000:00:1c.3: bridge window [mem 0x40000000-0x401fffff 64bit pref]pci 0000:00:01.0: found PCI INT A -> IRQ 9pci 0000:00:01.0: sharing IRQ 9 with 0000:00:01.1pci 0000:00:01.0: sharing IRQ 9 with 0000:00:01.2pci 0000:00:01.0: sharing IRQ 9 with 0000:00:1c.1pci 0000:00:01.0: sharing IRQ 9 with 0000:01:00.0pci 0000:00:01.0: sharing IRQ 9 with 0000:04:00.0pci 0000:00:01.1: found PCI INT A -> IRQ 9pci 0000:00:01.1: sharing IRQ 9 with 0000:00:01.0pci 0000:00:01.1: sharing IRQ 9 with 0000:00:01.2pci 0000:00:01.1: sharing IRQ 9 with 0000:00:1c.1pci 0000:00:01.1: sharing IRQ 9 with 0000:01:00.0pci 0000:00:01.1: sharing IRQ 9 with 0000:04:00.0pci 0000:00:01.2: found PCI INT A -> IRQ 9pci 0000:00:01.2: sharing IRQ 9 with 0000:00:01.0pci 0000:00:01.2: sharing IRQ 9 with 0000:00:01.1pci 0000:00:01.2: sharing IRQ 9 with 0000:00:1c.1pci 0000:00:01.2: sharing IRQ 9 with 0000:01:00.0pci 0000:00:01.2: sharing IRQ 9 with 0000:04:00.0pci 0000:00:1c.0: found PCI INT A -> IRQ 10pci 0000:00:1c.0: sharing IRQ 10 with 0000:01:00.1pci 0000:00:1c.0: sharing IRQ 10 with 0000:01:00.4pci 0000:00:1c.0: sharing IRQ 10 with 0000:02:00.0pci 0000:00:1c.0: sharing IRQ 10 with 0000:05:00.0pci 0000:00:1c.1: found PCI INT B -> IRQ 9pci 0000:00:1c.1: sharing IRQ 9 with 0000:00:01.0pci 0000:00:1c.1: sharing IRQ 9 with 0000:00:01.1pci 0000:00:1c.1: sharing IRQ 9 with 0000:00:01.2pci 0000:00:1c.1: sharing IRQ 9 with 0000:01:00.0pci 0000:00:1c.1: sharing IRQ 9 with 0000:04:00.0pci 0000:00:1c.2: found PCI INT C -> IRQ 11pci 0000:00:1c.2: sharing IRQ 11 with 0000:01:00.2pci 0000:00:1c.2: sharing IRQ 11 with 0000:06:00.0pci 0000:00:1c.3: found PCI INT D -> IRQ 10pci 0000:00:1c.3: sharing IRQ 10 with 0000:00:1f.2pci 0000:00:1c.3: sharing IRQ 10 with 0000:00:1f.3pci 0000:00:1c.3: sharing IRQ 10 with 0000:01:00.3pci 0000:00:1c.3: sharing IRQ 10 with 0000:07:00.0NET: Registered protocol family 2IP route cache hash table entries: 32768 (order: 6, 262144 bytes)TCP established hash table entries: 131072 (order: 9, 2097152 bytes)TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)TCP: Hash tables configured (established 131072 bind 65536)TCP reno registeredUDP hash table entries: 512 (order: 2, 16384 bytes)UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)NET: Registered protocol family 1pci 0000:00:1d.0: found PCI INT A -> IRQ 9platform rtc_cmos: registered platform RTC device (no PNP device found)Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)io scheduler noop registeredio scheduler cfq registered (default)pci_hotplug: PCI Hot Plug PCI Core version: 0.5Serial: 8250/16550 driver, 4 ports, IRQ sharing disabledserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550Aserial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550Ai8042: PNP: No PS/2 controller found. Probing ports directly.i8042: No controller foundmousedev: PS/2 mouse device common for all micecpuidle: using governor laddercpuidle: using governor menuNetfilter messages via NETLINK v0.30.TCP cubic registeredNET: Registered protocol family 17Freeing unused kernel memory: 61244k freedWrite protecting the kernel read-only data: 6144kFreeing unused kernel memory: 1464k freedFreeing unused kernel memory: 1296k freed____________________ init start ____________________ 2b1af7f3a8